Tag: install smoke detector onto ceiling

Ever wondered how to physically attach our ZEN Smoke Alarms onto your ceiling? You’ll be amazed at how simple it really is! A major advantage of wireless 10-year battery powered smoke detectors is that there is no electrical hardwiring involved – this means they can be installed by property owners without an electrician. ZEN interconnected smoke alarm bundle packs will even arrive to you already interconnected together as a group – no need to pair them up as we’ve done it for you – just switch them on and they’re good to go – how easy is that!

Checklist:

  • ZEN smoke alarm and its mounting bracket
  • Screws and anchor plugs (included with our ZEN smoke alarms)
  • Screwdriver or a cordless drill with 5mm drill bit
  • Pencil

STEP 1: Twist the mounting bracket to remove it from the back of the smoke detector.

STEP 2: Locate the mounting bracket in your chosen position on the ceiling. Use a pencil to mark the location of the two mounting bracket slots on the ceiling as per above.

STEP 3: Use a 5mm drill bit to drill a pilot hole at each location marked on the ceiling. Now insert an anchor plug into each hole and use the two screws to attach the mounting bracket to the chosen position.

STEP 4: Attach the smoke alarm to the mounting bracket and firmly turn clockwise to lock it into place.

STEP 5: Press the surface of the ZEN smoke alarm (the test button) to ensure you smoke alarm is working properly. If you have more than one interconnected smoke detector, then the others in the same group should also activate within approximately 10 (this is normal). Allow all the smoke alarms to finish their full test cycle without pressing any other buttons – don’t worry, they will all stop automatically after approximately 10-15 seconds.

Where Should I Install

Wireless Interconnected Smoke Alarms?

Queensland smoke detectors should be placed inside every bedroom and the interconnecting hallway outside the bedrooms. If there is no common hallway outside the bedrooms, then install a smoke detector on the nearest exit route or travel path from the dwelling. If it is a multi-story property, then at least one fire alarm must be installed on every level of the property.

Additionally, smoke detectors should not be installed within 30cm from the edge of a wall, within 30cm from a light fixture, 40cm from an air conditioner vent and also not within 40cm from a ceiling fan blade. It is preferable to install smoke detectors on the ceiling, as opposed to the wall.

Don’t forget, if replacing a 240V hardwired smoke alarm in QLD, the Queensland smoke alarm laws state that it must be replaced with another 240V hardwired smoke alarm (requires an electrician to do so).

WARNING! – do not use these products

when installing your smoke alarms!

Be wary using adhesive mounting kits or drill-free magnet mounting kits with your smoke alarms – we do not recommend using these products as they do NOT last. Although Australian Standard 3786:2014 doesn’t specify how smoke alarms should be attached to the ceiling, if you use the aforementioned products your smoke alarm will fall from the ceiling after a period of days, weeks or months, and it will become broken when it smashes onto the floor. How do we know this? – we stopped selling the adhesive kits / drill-free magnetic mounts several years ago. Consumer feedback indicated the products were unreliable and in good conscience we could not continue selling them – we’d rather have happy satisfied customers at the expense of profits any day. Spend a few extra minutes and use the included screws to affix your smoke alarm to the ceiling – this is the best way to install your wireless smoke alarms.

Want to know more? Watch our ZEN quick-start video or call us on 0478 596 402

We love talking smoke alarms!

ZEN Interconnected Smoke Alarms